904L Material Seawater Submersible Pump

Seawater submersible pump is used in the field of offshore platforms and is used as a seawater lift pump. Submersible pumps operate in seawater, not only to prevent corrosion from seawater, but also to meet the long-term wear requirements in seawater. Therefore, the seawater submersible pump produced by Zhengzhou Shenlong Pump Industry Factory has 304 sea water pump, 316 sea water pump, 316L sea water pump and 904L sea water pump. These seawater submersible pumps recommend the corresponding material requirements in the field of application based on the corrosive medium of the water.

904L seawater submersible pump technical parameters:

Capacity: up to 2500m3/h

Lift Head: up to 600m

Motor Power: up to 410kw

Voltage: 380V/440V/460V/480V/660V

Frequency: 50Hz/60Hz

Water Contect: ≤0.01%

Protection Class: IP68

Insulation Class: F

Application: Saltwater, Seawater desalination, Seawater lifting, aquaculture, etc.

Material:

Impeller: 904L cast stainless steel;

Pump casing: 904L cast stainless steel;

Pump shaft: Stainless steel 904L.      Filter: 904L.      Connecting bolt: 904L

Motor upper and lower guide housing: 904 cast stainless steel. Middle section: 904L cast stainless steel.

Connection bolt: 904L cast stainless steel

Motor seal: rubber seal O-ring; mechanical seal;

904L Seawater Submersible Pumps

郑州市神龙泵业工厂生产多种型号的904L海水潜水泵，价格均有所不同。904L海水泵体各部位零件由我厂完成，并成立不锈钢潜水泵生产车间。欢迎咨询不锈钢海水潜水泵---Tel: 0086-371-56066186